 |
GX53 Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1
পণ্যের বিবরণ:
| উৎপত্তি স্থল: | চীন ডংগুয়ান |
| পরিচিতিমুলক নাম: | kingpo |
| সাক্ষ্যদান: | iso9001 |
| Model Number: | 7006-142E-1 |
প্রদান:
| Minimum Order Quantity: | 1 |
|---|---|
| মূল্য: | To be quoted |
| প্যাকেজিং বিবরণ: | নিরাপত্তা শক্ত কাগজ প্যাক বা পাতলা পাতলা কাঠ বাক্স |
| ডেলিভারি সময়: | কাজ সাত দিন |
| Payment Terms: | T/T |
| যোগানের ক্ষমতা: | প্রতি মাসে ১০০০ pcs |
|
বিস্তারিত তথ্য |
|||
| পরিচিতিমুলক নাম: | Kingpo | Model Number: | KP-7006-142E-1 |
|---|---|---|---|
| Material: | Hardness Steel | Standard: | IEC60061-3 |
| লক্ষণীয় করা: | Go No Go Gauge,Iec 60061 3 |
||
পণ্যের বর্ণনা
GX53 Lamp cap gauge | Go and Not Go Gauge for Checking Keyways in Caps GX53 , 7006-142E-1
PURPOSE: PURPOSE: To check caps GX53-1 in the following respects:
- correct keyway position in relation to cap pins;
- the minimum height and width of the keyway (dimensions W and X2);
- to prevent the possibility of insertion of only one pin.
TESTING: It shall be possible to insert the cap into the gauge until the reference plane of the cap is in contact with surface Y of the gauge. It shall then be possible to turn the cap into contact position.
It shall not be possible to insert only one pin of the cap into the gauge and turn the gauge into contact position.
Related gauges for GX53
| 7006-142-1 "GO" AND "NOT GO" GAUGE FOR CAPS |
GX53 | PURPOSE: To check caps GX53-.. in the following respects: - the diameter of the individual pins (dimension A); - the combined displacement and diameter of the pins (dimensions A and D); - the length of the pins (dimension F1); - the recess length and diameter of the pins (dimensions F2 and E); - the maximum cap outline with respect to dimensions M, L1 and K. |
| 7006-142D-1 "NOT GO" GAUGE FOR CAPS |
GX53 | PURPOSE: To check the minimum cap diameter (dimension L1) of caps GX53-.. |
| 7006-142E-1 "GO" AND "NOT GO" GAUGE FOR CHECKING KEYWAYS IN CAPS |
GX53 | PURPOSE: To check caps GX53-1 in the following respects: - correct keyway position in relation to cap pins; - the minimum height and width of the keyway (dimensions W and X2); - to prevent the possibility of insertion of only one pin. |
| 7006-142F-1 "NOT GO" GAUGE FOR CHECKING KEYWAYS IN CAPS |
GX53 | PURPOSE: To check the maximum keyway width (dimension X) of caps GX53-.. |
এই পণ্য সম্পর্কে আরও বিশদ জানতে চান