logo
বার্তা পাঠান
পণ্য
পণ্যের বিবরণ
বাড়ি > পণ্য >
Metal Material IEC 60529 Jointed Test Finger 12mm Without Specific Tolerance

Metal Material IEC 60529 Jointed Test Finger 12mm Without Specific Tolerance

MOQ.: 1
মূল্য: To be quoted
স্ট্যান্ডার্ড প্যাকিং: নিরাপত্তা শক্ত কাগজ প্যাক বা পাতলা পাতলা কাঠ বাক্স
বিতরণ সময়কাল: কাজ সাত দিন
অর্থ প্রদানের পদ্ধতি: T/T
সরবরাহ ক্ষমতা: প্রতি মাসে 50 পিসি
বিস্তারিত তথ্য
উৎপত্তি স্থল
চীন
পরিচিতিমুলক নাম
kingpo
সাক্ষ্যদান
iso9001 ce
material:
metal
tolerance on angles:
0/-10°
tolerance on linear dimensions:
over 25mm: +/-0.2
বিশেষভাবে তুলে ধরা:

articulated finger probe

,

ul finger probe

পণ্যের বিবরণ

 

IEC 60529 Jointed test finger 12mm, IP2X

 

Material:

 

metal, except where otherwise specified

linear dimensions in milimeters

 

tolerance on dimensions without specific tolerance:
on angles: 0/-10°
on linear dimensions:
up to 25mm: 0/-0.05
over 25mm: +/-0.2
both joints shall permit movement in the same plane and the same direction through an angle of 90°with a 0 to +10° tolerance.
 
Metal Material IEC 60529 Jointed Test Finger 12mm Without Specific Tolerance 0
Metal Material IEC 60529 Jointed Test Finger 12mm Without Specific Tolerance 1

 

 

প্রস্তাবিত পণ্য
এখনই যোগাযোগ করুন
পণ্য
পণ্যের বিবরণ
Metal Material IEC 60529 Jointed Test Finger 12mm Without Specific Tolerance
MOQ.: 1
মূল্য: To be quoted
স্ট্যান্ডার্ড প্যাকিং: নিরাপত্তা শক্ত কাগজ প্যাক বা পাতলা পাতলা কাঠ বাক্স
বিতরণ সময়কাল: কাজ সাত দিন
অর্থ প্রদানের পদ্ধতি: T/T
সরবরাহ ক্ষমতা: প্রতি মাসে 50 পিসি
বিস্তারিত তথ্য
উৎপত্তি স্থল
চীন
পরিচিতিমুলক নাম
kingpo
সাক্ষ্যদান
iso9001 ce
material:
metal
tolerance on angles:
0/-10°
tolerance on linear dimensions:
over 25mm: +/-0.2
Minimum Order Quantity:
1
মূল্য:
To be quoted
প্যাকেজিং বিবরণ:
নিরাপত্তা শক্ত কাগজ প্যাক বা পাতলা পাতলা কাঠ বাক্স
ডেলিভারি সময়:
কাজ সাত দিন
Payment Terms:
T/T
যোগানের ক্ষমতা:
প্রতি মাসে 50 পিসি
বিশেষভাবে তুলে ধরা

articulated finger probe

,

ul finger probe

পণ্যের বিবরণ

 

IEC 60529 Jointed test finger 12mm, IP2X

 

Material:

 

metal, except where otherwise specified

linear dimensions in milimeters

 

tolerance on dimensions without specific tolerance:
on angles: 0/-10°
on linear dimensions:
up to 25mm: 0/-0.05
over 25mm: +/-0.2
both joints shall permit movement in the same plane and the same direction through an angle of 90°with a 0 to +10° tolerance.
 
Metal Material IEC 60529 Jointed Test Finger 12mm Without Specific Tolerance 0
Metal Material IEC 60529 Jointed Test Finger 12mm Without Specific Tolerance 1