• IMH-1 Electrical Safety Test Equipment , Impact Durability Test Machine For Electric Hammer
  • IMH-1 Electrical Safety Test Equipment , Impact Durability Test Machine For Electric Hammer
  • IMH-1 Electrical Safety Test Equipment , Impact Durability Test Machine For Electric Hammer
ভালো দাম IMH-1 Electrical Safety Test Equipment , Impact Durability Test Machine For Electric Hammer অনলাইন

IMH-1 Electrical Safety Test Equipment , Impact Durability Test Machine For Electric Hammer

পণ্যের বিবরণ:

Place of Origin: China
পরিচিতিমুলক নাম: KingPo
সাক্ষ্যদান: Calibration Certificate

প্রদান:

Minimum Order Quantity: 1
মূল্য: To be quoted
প্যাকেজিং বিবরণ: নিরাপত্তা শক্ত কাগজ প্যাক বা পাতলা পাতলা কাঠ বাক্স
Payment Terms: T/T
এখন যোগাযোগ

বিস্তারিত তথ্য

power: 120V/60Hz gas: 5~8 bar
Electric control: Mitsubishi 7-inch PLC touch screen on-load voltage: adjustable voltage 0-250V,display current
No-load rotation angle: 0°,90°,180°,manual positive and negative inversion No-load rotation speed: 0-360°/s ,can be preset
লক্ষণীয় করা:

abrasion resistance test machine

,

electrical safety analyzer

পণ্যের বর্ণনা

 

Product Briefing:

 

Electric hammer no-load service life,endurance test system suitable for durability project test of hand-held electric power tool below2.5KW;

meet standard of GBB3883.1-2008,GB3881.7-2012 Term17,IEC6074-2-6:2003;professional testing equipment for professional test institution and power tool manufacturer.

Electric hammer no-load service life,endurance test system meets standard of IEC6074-2-6 Fig. 103,assemble an electric hammer and electrodrill;make it discontinuous running to check if there are electric and mechanical hazards emerging under normal operation.

The device adopts PLC control and touch screen intelligent operation;gas pressurization and machine automatic positioning angle;full test integration with simple and convenient operation.

 

Test Principal and Structure

No-load operation test:all of the electric hammer including hammer drill are assembled to the tester with plump as Fig.103 shown. Under the condition of hammer drill separating from electric hammer mechanism,

keep no-load operating for 12h at 1.1 times the constant voltage,then keep no-load operating for 12h at 0.9 times the constant voltage;each operation period consists of 100s connection runtime and 20s power outage;place the electric hammer at three different directions(horizontal,vertically up-ward,vertically downward) under each voltage;make it operating for 4h on each position.

Load operation test:all of the electric hammer including hammer drill are assembled to the tester with plump as Fig.103 shown;conduct 4 tests;each for 6h with 30min time interval;make it discontinuous running;

each operation period consists of 30s connection runtime and 90s power outage. Exert an axial force which ensure stable operation of impact me-chanism on electric hammer through an elastomer;You can not only use the equipped switch to connect and disconnect tool;allowed to change brush;add lubricating oil and grease on tool like normal operation.If there is mechanical breakdown during test of impact equipment without electri-fying the accessible part,replace it with a new impact equipment

 

Structure: consist of three part,electric control cabinet and mechanical devices

1.electric control cabinet:include Mitsubishi 7-inch PLC touch screen, control panel,load(adjustable voltage 0-250V,display voltage and current)

2.mechanical device shown as Fig.103 and Figure above:include 360kg steel foundation,impacting bit,steel base and fixture.

 

Technical Parameter

No Item Parameter
1 power 120V/60Hz
2 gas 5~8 bar
3 Electric control Mitsubishi 7-inch PLC touch screen
4 on-load voltage adjustable voltage 0-250V,display current
5 No-load rotation angle 0°,90°,180°,manual positive and negative inversion
6 No-load rotation speed 0-360°/s ,can be preset
7 Connection time 0-999.9s,can be preset
8 Power outage time 0-999.9s,can be preset
9 Test time 0-9999h,can be preset
10 General test time 0-9999h,can be preset
11 Time interval 0-9999min,can be preset
12 on-load pressure 100,125,150,175,200,250,300,350,400N can be preset
13 Impacting bit 0.7,1.4,2.3,3.4kg(including quality of connecting stalk),work together as table 101 shown
14 Steel ball Φ38mm
15 Steel base 100,140,180,220mm,work together as table 101 shown
16 Rubber disk 4pcs,match with steel base and steel foundation
17 steel foundation Weigh 90kg,equipped with 9 30kg’s weights
18 Dimension and weight Electric cabinet:60*40*75cm,weigh 100kg;machine entablature 40*40*200cm,weigh 390kg

 

 

এই পণ্য সম্পর্কে আরও বিশদ জানতে চান
আমি আগ্রহী IMH-1 Electrical Safety Test Equipment , Impact Durability Test Machine For Electric Hammer আপনি কি আমাকে আরও বিশদ যেমন প্রকার, আকার, পরিমাণ, উপাদান ইত্যাদি পাঠাতে পারেন
ধন্যবাদ!
তোমার উত্তরের অপেক্ষা করছি.