logo
বার্তা পাঠান
পণ্য
পণ্যের বিবরণ
বাড়ি > পণ্য >
G13 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4

G13 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4

MOQ.: 1
দাম: To be quoted
স্ট্যান্ডার্ড প্যাকিং: নিরাপত্তা শক্ত কাগজ প্যাক বা পাতলা পাতলা কাঠ বাক্স
বিতরণ সময়কাল: কাজ সাত দিন
অর্থ প্রদানের পদ্ধতি: T/T
সরবরাহ ক্ষমতা: প্রতি মাসে ১০০০ pcs
বিস্তারিত তথ্য
উৎপত্তি স্থল
চীন
পরিচিতিমুলক নাম
kingpo
সাক্ষ্যদান
iso9001 ce
Model Number
7006-44-4
পরিচিতিমুলক নাম:
Kingpo
Material:
Hardness Steel
Standard:
IEC60061-3
HRC:
C58 to C60
বিশেষভাবে তুলে ধরা:

Iec 60061 3

,

Go And Not Go Gauge

পণ্যের বিবরণ
G13 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4 Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter and displacement of pins(including bosses) of unmounted bi-pin caps G13. Testing: the pins of the cap shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge shall contact. In this position the ends of the pins shall be co-planar with or
পণ্য
পণ্যের বিবরণ
G13 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4
MOQ.: 1
দাম: To be quoted
স্ট্যান্ডার্ড প্যাকিং: নিরাপত্তা শক্ত কাগজ প্যাক বা পাতলা পাতলা কাঠ বাক্স
বিতরণ সময়কাল: কাজ সাত দিন
অর্থ প্রদানের পদ্ধতি: T/T
সরবরাহ ক্ষমতা: প্রতি মাসে ১০০০ pcs
বিস্তারিত তথ্য
উৎপত্তি স্থল
চীন
পরিচিতিমুলক নাম
kingpo
সাক্ষ্যদান
iso9001 ce
Model Number
7006-44-4
পরিচিতিমুলক নাম:
Kingpo
Material:
Hardness Steel
Standard:
IEC60061-3
HRC:
C58 to C60
Minimum Order Quantity:
1
মূল্য:
To be quoted
প্যাকেজিং বিবরণ:
নিরাপত্তা শক্ত কাগজ প্যাক বা পাতলা পাতলা কাঠ বাক্স
ডেলিভারি সময়:
কাজ সাত দিন
Payment Terms:
T/T
যোগানের ক্ষমতা:
প্রতি মাসে ১০০০ pcs
বিশেষভাবে তুলে ধরা

Iec 60061 3

,

Go And Not Go Gauge

পণ্যের বিবরণ
G13 lamp cap gauge | "Go" and "Not Go" gauge for unmounted bi-pin cap(not for use on finished lamps) G13-7006-44-4 Purpose: to check dimensions E min., E max., F min., G max. and the combined pin diameter and displacement of pins(including bosses) of unmounted bi-pin caps G13. Testing: the pins of the cap shall enter the gauge at surface O and, when fully inserted, the surfaces of cap and gauge shall contact. In this position the ends of the pins shall be co-planar with or